Product Review

qdc CRAVE

Reference Price ? 2900 USD
Overall Rating
1.5
Scientific Validity
0.5
Technology Level
0.4
Cost-Performance
0.0
Reliability & Support
0.4
Design Rationality
0.2

The 2,900 USD qdc CRAVE packs 15 drivers per side into a universal in-ear monitor, yet a 66.92 USD in-ear monitor with 2.5 mm and 4.4 mm cables and a 6.35 mm adapter matches its functions and tracks the Harman in-ear target more closely on the same measurement rig.

Overview

The CRAVE is a universal-fit in-ear monitor from the Chinese brand qdc. Aiuto, qdc’s Japanese distributor, describes it as a 10th-anniversary concept model planned and developed jointly by qdc and Aiuto, built on the driver set and configuration of the custom-only EMPRESS and redesigned and retuned as a universal in-ear monitor [1][2]. qdc’s Chinese site gives 2026-01-17 as its launch date [3], and Aiuto announced the Japanese release on 2026-01-30, with release on 2026-02-06 [2]. In the US, MusicTeck, which qdc lists as a US distributor along with Moon Audio, sells it [4][5].

Each earpiece holds 15 drivers: one custom 10 mm dynamic driver with a composite diaphragm for the sub-bass, four custom balanced-armature drivers for the bass, two mid-range balanced-armature drivers, four balanced-armature drivers for the highs and four electrostatic drivers for the super-highs, in a sealed design with a 5-way crossover and five sound channels [1]. The manufacturer values are a frequency range of 5–70,000 Hz, a sensitivity of 105 dB SPL/mW, an impedance of 15 Ω and an isolation of 26 dB [1]. The cable is about 120 cm long, with 0.78 mm flat 2-pin connectors and interchangeable L-shaped 3.5 mm, 2.5 mm and 4.4 mm plugs [1]. The CRAVE is made in China [1].

Scientific Validity

\[\Large \text{0.5}\]

Precogvision’s measurement database publishes raw left and right frequency-response files for one CRAVE unit, dated 2026-08-20 and made with REW V5.20 using a 256k sweep and no smoothing [6][7]. The files do not state the rig. The database author’s measurement guide describes an IEC-711 clone coupler with a measurement chain matching the one recorded in the files and calls the setup reasonably accurate up to about 10 kHz or the resonance peak, whichever comes first [8], and IEC 60318-4 specifies that this type of ear simulator simulates the human ear from 100 Hz to 10 kHz [9]. With the overall level aligned, the standard deviation of the error from the database’s Harman in-ear 2019 target [10] is 2.26 dB over 20.3 Hz–10 kHz (left 2.22 dB, right 2.31 dB).

Relative to the 1 kHz level, the response is +6.9 dB at 20.3 Hz, +5.7 dB at 50 Hz and +3.9 dB at 100 Hz, falls to −3.1 dB at 500 Hz, and rises to +3.3 dB at 1.5 kHz and +3.8 dB at 2 kHz, reaching +5.1 dB near 4.7 kHz, the highest point between 1 and 5 kHz [6][7]. At 3 kHz it is +2.8 dB, where the target is +9.3 dB. With the levels aligned, the mean error is +1.88 dB over 100–500 Hz, −3.81 dB over 2–5 kHz and −1.66 dB over 5–10 kHz, and the response is −3.2 dB at 10 kHz relative to 1 kHz. Above 10 kHz the 711-type coupler no longer simulates a human ear, so treble readings there are low-confidence [9]. Precogvision’s raw L/R data for one unit (IEC-711-clone coupler, unsmoothed) match within ±0.5 dB from 20 Hz to 2 kHz and within about 0.7 dB up to 5 kHz, with a maximum difference below 10 kHz of 1.45 dB at 8.1 kHz [6][7].

The score rests on frequency response, the only fidelity axis with third-party data. The 2.26 dB deviation is moderate, but it comes from one unit in one database whose files do not state the rig, and the 2–5 kHz region sits below the target, giving 0.5.

Technology Level

\[\Large \text{0.4}\]

Aiuto names two qdc technologies in the CRAVE: multi-tube filtering, which it says achieves crosstalk suppression and accurate tuning and phase, and the Dmagic acoustic structure, an independent acoustic cavity and sound tube for the dynamic driver that it says achieves left-right consistency and a flat response [1]. Aiuto’s EMPRESS-C page, with specifications as of 2024-04-12, describes qdc’s multi-tube filtering as used in the Anole V14 and the Dmagic structure as used in the Dmagic 3D [11]. The mid-range balanced-armature pair is described as upgraded for the CRAVE, and the connector is a standard 0.78 mm flat 2-pin type rather than qdc’s own 2-pin, chosen for cable compatibility [1]. The CRAVE has no switches [12].

LETSHUOER’s SONATA combines two dynamic, four balanced-armature and four electrostatic drivers with four-channel acoustic tube filtering and a 0.78 mm 2-pin connector [13]. The CRAVE is passive, with no signal processing [1][12]. The multi-tube filtering and the Dmagic structure are qdc’s own designs, but a passive tribrid design that combines qdc structures already shipping in 2024 is one that competitors can readily match, and the design is analog only, with no digital integration, giving 0.4.

Cost-Performance

\[\Large \text{0.0}\]

This site evaluates based solely on functionality and measured performance values, without considering driver types or configurations.

MusicTeck lists the CRAVE at 2,900 USD, and the listing was out of stock on 2026-11-09 [4]. This price is used as the purchase price.

The comparator is the 7HZ x Crinacle Zero:2 (Silver, 3.5 mm, no microphone) at 24.99 USD at Linsoul [14], combined with two Tripowin Zonie cables with 0.78 mm 2-pin connectors, one with a 2.5 mm plug and one with a 4.4 mm plug, at 17.99 USD each [15], and a Hosa GPM-103 adapter from a 3.5 mm jack to a 6.35 mm plug at 5.95 USD [16], for 66.92 USD in total at regular prices. The combination is equipped with a wired universal in-ear design, a detachable 0.78 mm 2-pin cable, 3.5 mm, 2.5 mm and 4.4 mm terminations and a 6.35 mm adapter [14][15][16], and on the same measurement database, rig and chain, its standard deviation from the Harman in-ear 2019 target is 1.80 dB over 20.3 Hz–10 kHz against the CRAVE’s 2.26 dB, and 1.84 dB against 2.56 dB over 100 Hz–10 kHz [17][18][6][7][10]. Nominal frequency ranges (CRAVE 5 Hz–70 kHz, Zero:2 10 Hz–20 kHz) carry no tolerance and are treated as reference data only; on the same measurement database both responses cover 20.3 Hz–19 kHz, and the Zero:2’s deviation from the Harman in-ear 2019 target is lower in every band evaluated, including 20.3 Hz–19 kHz (2.21 dB against 2.72 dB) [1][19][17][18][6][7][10]. Passive isolation is not compared: the CRAVE’s 26 dB is a manufacturer figure with no stated conditions, and the Zero:2’s listings state no isolation figure [1][14][19]. The equivalence rests on functions and same-rig frequency-response deviation.

CP = 66.92 USD ÷ 2,900 USD = 0.023 → 0.0

Using the current sale prices of 21.24 USD, 15.29 USD for each cable and 4.95 USD (56.77 USD in total) also gives 0.0 [14][15][16].

Reliability & Support

\[\Large \text{0.4}\]

In Japan, Aiuto has been qdc’s sole distributor since 2022-04-01, succeeding Mixwave, and took over warranty and support for units sold earlier [20]. Aiuto covers the CRAVE’s body for one year and the cable and accessories for six months, counted from the purchase date, with a dated receipt required, and excludes connector damage and other faults after recabling [1]. In the US, MusicTeck’s FAQ states a 1-year manufacturer’s warranty [21].

The CRAVE is a passive design with standard 0.78 mm flat 2-pin connectors [1]. A reviewer reports that a third-party 2-pin cable connected without problems and that the interchangeable plug system is quite robust [12]. Aiuto ended repairs of the qdc SUPERIOR EX on 2025-08-07 because repair parts had become hard to secure, 453 days after its 2024-05-11 release, and said that other products may also become unrepairable when parts run out [22][23]. This concerns a different model and is a record at the company level. The US CPSC database and the recall database of Japan’s Consumer Affairs Agency list no recall for qdc [24][25]. The 1-year warranty and the early end of repairs for the SUPERIOR EX outweigh the simple passive construction with standard connectors, giving 0.4.

Rationality of Design Philosophy

\[\Large \text{0.2}\]

Aiuto says the supplied cable offers high durability and a neutral sound with extremely low loss [1], and no measurement links the cable to that claim. Aiuto also says the CRAVE keeps high resolution at low volume without becoming harsh at high volume [1], but a passive in-ear monitor without signal processing has one frequency response at every listening level, and no mechanism or measurement is given for the claim. The distributor-published FR graph, conditions unstated, ends at about 40 kHz and shows about −19 dB at 20 kHz relative to 1 kHz [26]. The 5–70,000 Hz figure has no tolerance and is not evidenced above about 40 kHz [1][26]. The design combines the EMPRESS driver set and configuration with the multi-tube filtering and the Dmagic structure, both shipping in qdc products by 2024 [1][11]. The price pays for 15 drivers per side, a large shell with a foil faceplate whose pattern varies by unit, a carrying case and a cable with L-shaped 3.5 mm, 2.5 mm and 4.4 mm plugs [1][12], while a 24.99 USD in-ear monitor deviates less from the Harman in-ear target on the same rig [14][17][18]. Claims of audible effects that no measurement supports, an investment in driver count and decoration that the measured response does not reward, and a conservative approach that combines existing qdc designs give 0.2.

Advice

The CRAVE suits listeners who want a sealed fit with a sub-bass shelf of about 7 dB above the 1 kHz level and a rise of about 3–5 dB at 1.5–5 kHz that stays below the Harman in-ear target in the 2–5 kHz region [6][7][10]. One reviewer finds the shell much larger than that of the UE Live and a size larger than that of the Anole V14, and the ear hook is fixed, so a demo is advisable before purchase [12][27]. The same reviewer’s impedance graph runs from 35.6 Ω at 20 Hz to about 11.7 Ω near 13.4 kHz, so a source with low output impedance keeps the response as measured [12]. Third-party cables fit the 0.78 mm 2-pin sockets, but Aiuto does not cover connector damage after recabling [1][12]. The package includes a cable of about 120 cm with L-shaped 3.5 mm, 2.5 mm and 4.4 mm plugs, a 3.5 mm to 6.35 mm adapter, qdcTips and double-flange tips in S, M and L, a flight adapter, a cleaning tool and a case [1]. In the US, the MusicTeck listing was out of stock on 2026-11-09 [4]. Listeners who want a closer match to the Harman in-ear target with the same plug options can get the Zero:2 with two Tripowin Zonie cables and a 6.35 mm adapter for 66.92 USD [14][15][16].

References

[1] Aiuto - CRAVE|qdc product page [JA] - https://www.aiuto-jp.co.jp/products/product_5992.php - accessed 2026-11-09 - specification table as of January 2026: 15 drivers per side (one custom 10 mm dynamic, four custom balanced-armature for the bass, two mid-range balanced-armature, four balanced-armature for the highs, four electrostatic for the super-highs), 5-way, sealed, 5–70,000 Hz, 105 dB SPL/mW, 15 Ω, isolation 26 dB; 0.78 mm flat 2-pin; L-shaped 3.5/2.5/4.4 mm plugs; cable about 120 cm; warranty body 1 year, cable and accessories 6 months, from the purchase date with a dated receipt, recabling damage excluded; foil pattern varies by unit; accessories; made in China; multi-tube filtering, Dmagic, cable and volume-level claims

[2] Aiuto - qdc CRAVE release announcement [JA] - https://www.aiuto-jp.co.jp/information/entry_2583.php - accessed 2026-11-09 - published 2026-01-30; Japanese release date 2026-02-06; 10th-anniversary concept model planned and developed jointly by qdc and Aiuto

[3] qdc - 旗舰双皇,震撼登场!qdc新品 CRAVE & Royal 正式发布! [ZH] - http://music.qdc.com/News/623.html - accessed 2026-11-09 - manufacturer news; launch date 2026-01-17

[4] MusicTeck - qdc CRAVE - https://shop.musicteck.com/products/qdc-crave - accessed 2026-11-09 - 2,900.00 USD; new; out of stock

[5] qdc - Dealer list - http://musicen.qdc.com/About/index7.html - accessed 2026-11-09 - USA: Music teck LLC, Moon Audio

[6] Precogvision - qdc Crave L (raw frequency response) - https://precog.squig.link/data/qdc%20Crave%20L.txt - accessed 2026-11-09 - file dated 2026-08-20; REW V5.20 Beta 61, 256k sweep, no smoothing; one unit, left channel

[7] Precogvision - qdc Crave R (raw frequency response) - https://precog.squig.link/data/qdc%20Crave%20R.txt - accessed 2026-11-09 - file dated 2026-08-20; REW V5.20 Beta 61, 256k sweep, no smoothing; one unit, right channel

[8] headphones.com - Become an Expert at Measuring IEMs (using Mac) - https://headphones.com/blogs/reviews/become-an-expert-at-measuring-iems-using-mac - accessed 2026-11-09 - Theo Lee (Precogvision), 2022-03-18; IEC-711 clone coupler, USB-C to 3.5 mm adapter chain, REW with 256k sweep; “reasonably accurate up until ~10kHz or the resonance peak (whichever comes first)”

[9] IEC - IEC 60318-4:2010 - https://webstore.iec.ch/en/publication/1445 - accessed 2026-11-09 - standard abstract; occluded-ear simulator; simulates the human ear from 100 Hz to 10 kHz

[10] Precogvision - Harman 2019 IEM Target - https://precog.squig.link/data/Harman%202019%20IEM%20Target.txt - accessed 2026-11-09 - Harman in-ear 2019 target file used by the database; dated 2021-02-13

[11] Aiuto - EMPRESS-C|qdc product page [JA] - https://www.aiuto-jp.co.jp/products/product_4895.php - accessed 2026-11-09 - specifications as of 2024-04-12; qdc’s multi-tube filtering as used in the Anole V14; Dmagic acoustic structure as used in the Dmagic 3D

[12] Sandal Audio - QDC Crave イヤホンの試聴レビュー [JA] - https://sandalaudio.blogspot.com/2026/10/qdc-crave.html - accessed 2026-11-09 - posted 2026-10-01; loaner unit; no switches; interchangeable plug system robust; a third-party 2-pin cable connected; shell much larger than UE Live and a size larger than Anole V14; impedance graph, 35.6 Ω at 20 Hz to about 11.7 Ω near 13.4 kHz, rig not stated

[13] LETSHUOER - SONATA - https://letshuoer.net/products/letshuoer-sonata-2dd-4-knowles-ba-4-sonion-est-flagship-tribrid-in-ear-monitors - accessed 2026-11-09 - two dynamic, four Knowles balanced-armature and four electrostatic drivers; four-channel acoustic tube filtering; 0.78 mm 2-pin

[14] Linsoul - 7HZ x Crinacle Zero: 2 - https://www.linsoul.com/products/7hz-x-crinacle-zero-2 - accessed 2026-11-09 - Silver, 3.5 mm, no mic: 24.99 USD regular price (21.24 USD sale); detachable 0.78 mm 2-pin

[15] Linsoul - Tripowin Zonie - https://www.linsoul.com/products/tripowin-zonie - accessed 2026-11-09 - 0.78 mm 2-pin with 2.5 mm or 4.4 mm plug: 17.99 USD regular price each (15.29 USD sale)

[16] Alamo Music - Hosa 3.5 mm TRS to 1/4 in TRS adapter (GPM-103) - https://alamomusic.com/collections/vendors/products/hosa-3-5mm-trs-to-1-4-in-trs-adapter - accessed 2026-11-09 - 5.95 USD regular price (4.95 USD sale); “adapt a mini stereo phone plug to a stereo phone jack”

[17] Precogvision - 7Hz Zero 2 L (raw frequency response) - https://precog.squig.link/data/7Hz%20Zero%202%20L.txt - accessed 2026-11-09 - file dated 2026-10-20; same measurement chain and settings as the CRAVE files; left channel

[18] Precogvision - 7Hz Zero 2 R (raw frequency response) - https://precog.squig.link/data/7Hz%20Zero%202%20R.txt - accessed 2026-11-09 - file dated 2026-10-20; same measurement chain and settings as the CRAVE files; right channel

[19] Epomaker (Rakuten) - 7Hz Zero 2 [JA] - https://item.rakuten.co.jp/epomaker/7hzzero2/ - accessed 2026-11-09 - specification table: 10 Hz–20 kHz, 32 Ω, 108 dB, 0.78 mm 2-pin

[20] Aiuto - qdc sole-distributor notice [JA] - https://www.aiuto-jp.co.jp/information/entry_1525.php - accessed 2026-11-09 - from 2022-04-01; succeeded Mixwave; took over warranty and support for earlier units

[21] MusicTeck - FAQ - https://shop.musicteck.com/pages/faq - accessed 2026-11-09 - “1-year manufacturer’s warranty”

[22] Aiuto - SUPERIOR EX repair-service end notice [JA] - https://www.aiuto-jp.co.jp/information/entry_2458.php - accessed 2026-11-09 - dated 2025-08-07; repair parts hard to secure; other products may also become unrepairable when parts run out

[23] Aiuto - SUPERIOR EX release announcement [JA] - https://www.aiuto-jp.co.jp/information/entry_2098.php - accessed 2026-11-09 - release date 2024-05-11

[24] US CPSC - SaferProducts recall database - https://www.saferproducts.gov/RestWebServices/Recall?format=json&Manufacturer=qdc - accessed 2026-11-09 - queries “qdc”, “Crave” and “Qili”; no records

[25] Consumer Affairs Agency (Japan) - Recall information search [JA] - https://www.recall.caa.go.jp/result/index.php - accessed 2026-11-09 - keywords “qdc”, “QDC”, “アユート”, “CRAVE” and “クレイブ”; no records

[26] Aiuto - CRAVE frequency-response comparison graph [JA] - https://www.aiuto-jp.co.jp/upload/images/qdc/CRAVE/%E5%91%A8%E6%B3%A2%E6%95%B0%E7%89%B9%E6%80%A73%E7%A8%AE%E6%AF%94%E8%BC%83.jpg - accessed 2026-11-09 - distributor-published; EMPEROR, EMPRESS and CRAVE curves; rig, level and smoothing not stated; x-axis ends near 40 kHz

[27] Kajelog - qdc CRAVE hands-on review [JA] - https://kajetblog.com/qdc-crave - accessed 2026-11-09 - metal nozzle; fixed ear hook

(2026.11.9)

External Search

Check additional information and availability outside this site.